Skip to content

DBC Router Logins: Change Wifi Name Password [UPDATED]

DBC Router Logins: Change Wifi Name Password [UPDATED]

All DBC routers come with the Login Credentials written on the backside. Sometimes, this information is different from product to product, but most of the time, the iterations are quite minimal.

You will need these details on the back of the router if you want to login to the Admin Portal if you wish to change the wifi name and password.

However, I am also providing the most common IP Address, Admin Username, and Password accepted by the DBC Router Admin portal.

Let’s take a closer look at the credentials you need to access the DBC Router Admin portal:

  • The IP address of the router is
  • The username is “admin.”
  • The password is “password or dbcUNO101,” and remember, it’s case-sensitive.
Default Pass, IP and Username of DBC Wifi Router is written on the back of router.

Now we will discuss the steps you need to follow in case you want to log in and make changes to the wifi name, password, admin pass, or any additional router settings.

Let’s get started.

In order to access the DBC Router admin portal, you need to make sure that the device you’re using is connected to the Wi-Fi signal from the router. It doesn’t matter if you don’t have an internet connection.

If you are setting up your device for the first time or have reset it, the device will broadcast a wifi name which may look like a model number of a router. You will have to connect with that wifi before you can access the admin portal. And you won’t need a wifi password to connect with it.

You can use different devices to access the portal, like your smartphone, laptop, PC, or tablet. Any regular web browser will work just fine. Once you have your browser open, there are three things you need to enter in order to access the DBC Router admin portal:

  1. IP Address: This special code helps your device find the portal.
  2. Default User Name: It’s a pre-set name that you can use to log in.
  3. Default Password: It’s a pre-set password with the user name.

Make sure you have all these details handy, and you’ll be able to access the DBC Router admin portal.

Access the Admin Portal of DBC:

Here are four easy steps to log in to your admin portal:

Step 1: Connect to the DBC Router’s Wi-Fi Network

To get started, you need to connect your device to the Wi-Fi network from the DBC router. This router sends out a signal that allows your device to communicate directly with it.

Steps to access Optilink Wifi Router. Connect to wifi.

Connecting your device to the router’s Wi-Fi network creates a special link between your device and the router. This link is important because it lets you access the router’s admin portal, where you can make important changes to its settings.

If you’re not connected to the router’s Wi-Fi network, you won’t be able to access the admin portal.

If your device has an Ethernet port, you can also use an Ethernet cable to connect directly to the DBC router. However, this may require some extra setup, and many devices nowadays don’t have Ethernet ports.

If you’re setting up a new DBC router or recently reset it, you can find the Wi-Fi name and password on the back of the router. If there is no wifi name or password, the device will broadcast a generic wifi name that will not require any password to connect with.

To get started, you can open any web browser on your device that’s connected to the DBC router’s Wi-Fi network.

Steps to access Optilink Wifi Router. Open Browser.

When you open a web browser, you can access the DBC router’s admin portal. This portal is usually accessed through a web page, where you can manage and control the router’s settings.

The great thing is that you don’t even need an active internet connection to access the DBC Portal. So, don’t worry if you’re not connected to the internet yet.

To begin, launch the web browser application and follow the instructions in step 3.

Step 3: Access the DBC Router’s Portal with its IP Address

To access your DBC router’s settings, you need to type its special address into the URL bar of your web browser. This address called the IP address, helps your browser find the router on the network.

Defualt IP Address of BDC Wifi Router

By typing the IP address in the URL bar, you’re telling your browser where to go to connect with the router. This connection lets you open the admin portal, where you adjust your router setting.

The IP address for the DBC router is

If that doesn’t work, you can try another common IP address,

Step 4: Enter the Router’s Username and Admin Password

Once you have an established connection between your device and router, now you will be presented with a window with the following dialogue box.

You will need to enter the default password and username to get into the admin portal.

Default Password of BDC Wifi Portal
  1. The username is “admin“. Make sure it’s all lowercase letters.
  2. Enter the password, which is dbcONU101 or password . Password is also case-sensitive.
  3. Enter the verification code, which is written in the brown box right above the login button.

You will be asked to change your password when you log in for the first time. Keep a simple new password that is easy to remember.

Change Default Admin Password on login for DBC router

Login again after you have changed your password.

If this password does not work, reset your DBC router by following the steps in the next heading, as someone else might have changed it.

By entering the correct admin password, you authenticate yourself as an authorized user with administrative privileges. This step ensures that only authorized individuals can make changes to the router’s configuration.

Find the reset button on your DBC router. It is usually a small, recessed button on the back or bottom of the device. The button may be labeled as “Reset” or “RST” or represented by a small hole.

Step 2: Prepare for Reset

With the DBC router powered on, press and hold down the reset button with a paperclip or a similar pointed object. Hold it for about 10-15 seconds.

How to reset DBC Wifi Router.

Step 3: Power Cycle the Router

While holding down the reset button, unplug the power cable from the router. Keep the reset button pressed for 10-15 seconds while the router is unplugged.

Step 4: Access Default Settings

Once the DBC router has finished resetting, it will return to its default factory settings.

You can now access the router’s admin portal using the default login credentials provided by the manufacturer.

It’s important to note that performing a router reset will erase all customized settings, including Wi-Fi passwords, port forwarding configurations, and any other changes you made to the router’s settings.

These default credentials are typically printed on the router itself or included in the router’s documentation. For DBC, it is; Username: admin, and the password is dbcONU101.

After the reset, you’ll need to reconfigure the router according to your preferences.

Most of the time, accessing the admin portal is to change the wifi name and password.

Here are easy steps to follow in case you want to change your DBC Wifi Name and Password.

Login to the admin portal with IP Address and your username/password.

Login to DBC Admin portal to change wifi password

Unfortunately, different DBC routers use different types of pre-installed firmware, so the admin portal can be slightly different for you. However, the primary functionality will remain the same, and you will be able to access the same settings in a different User Interface.

To change the wifi address of your DBC Router, follow these steps.

Then click on network

Then click on the WLAN tab in the secondary horizontal menu.

The click on WLAN

After that, click on the WLAN Basic menu from the left panel and change SSID, which will be your new wifi name. Click apply changes to change the wifi name.

Change SSID to change Wifi Name of your DBC Router

To change the wifi password, click on the WLAN Security on the left menu.

Change Pre-shared Key to change password of your DBC Router

Ensure the encryption type is WPA2 Mixed and the authentication mode is Personal. Change the Pre-Shared ID to change the DBC Router wifi password.

Changing the wifi name and password will disconnect all devices and will need to be reconnected.

Since you may not be logging in for the first time to your DBC Router, and you may have to change your admin portal password, here it is how you can do it.

We know you already changed the password when you logged in for the first time, but to have that window pop up again, you will have to reset your router, which has its own challenges.

You can not change your username.

So, here is a simple process of how to change your admin password.

Change admin password of Optilink router
  1. Login to the admin portal with the current password and username.
  2. Now go to the Management tab from the horizontal menu on the top.
  3. Enter your existing and new passwords to change the admin portal password of your DBC Router.
  4. Log out and Login to confirm the change.

In case you forget your admin password, you can always reset your device by following the steps mentioned above.

Leave a Reply

Your email address will not be published. Required fields are marked *