Skip to content

Syrotech Router Login Admin Password: Change Wifi Password

Syrotech Router Login Admin Password: Change Wifi Password

Typically, all Syrotech routers have a default wifi name and password written on the back of it.

There are cases when you need to log in to your Syrotech Router Admin portal to change your wifi password or admin credentials.

Credentials for Syrotech Router:

  • MAC IP address of the Router:
  • Username: admin
  • Password (Case Sensitive): Syro@43210$
Usename, password and IP Address of syrotech router

A few typical steps are required when logging into your Syrotech Router, almost the same for all models and types made by Syrotech.

Let’s discuss them one by one so you can access your router’s admin portal to make any changes.

Before you can log in to the Syrotech Router admin portal, your device, which you will use to access the admin portal, must be connected to the wifi connection being broadcasted by the router.

You DO NOT need an active internet connection to access the portal.

You can use any of the following devices to access the portal:

  1. Smartphone
  2. Laptop
  3. PC
  4. Tablet

You will also need a browser. Any default browser will work. Once inside your browser, you need the following three items to access your Syrotech Router admin portal.

  1. IP Address to access the portal
  2. Default User Name
  3. Default Password

Access the Admin Portal of Syrotech:

Here are four easy steps to log in to your admin portal:

Step 1: Connect to the Syrotech Router’s Wi-Fi Network

Connect your device to the Wi-Fi network being broadcasted by the Syrotech router. Connecting your device to the router’s Wi-Fi network establishes a direct communication link between your device and the router.

Steps to access Syrotech Wifi Router. Connect to wifi.

This enables you to access the router’s admin portal and make necessary configuration changes. If you are not connected, you won’t be able to get access to the admin portal.

You can also use an Ethernet Cable to connect to your Syrotech Router, but that may need some configuration, and most devices nowadays do not have Ethernet ports.

If you are setting up a new Syrotech router or connecting with it after resetting it, you can access its Wi-Fi Name and Password on the back of the router.

The Wi-Fi name (SSID) and password are required to authenticate and connect your device securely to the router’s network.

Open any web browser on the device that is connected to the Syrotech router’s Wi-Fi network. Web browsers provide a user-friendly interface for accessing websites and web-based applications.

Steps to access Syrotech Wifi Router. Open Browser.

Opening a web browser allows you to access the Syrotech router’s admin portal, which is typically accessed through a web-based interface.

You DO NOT need an active internet connection to access the Syrotech Portal.

Launch the web browser application. It is the primary tool you will use to access and navigate the Syrotech Router Admin Portal. It’s more like a way to access the database established inside the router.

Step 3: Access the Syrotech Router’s Portal with its IP Address

Type the Syrotech router’s IP address in your web browser’s URL bar. The IP address uniquely identifies the Syrotech router on the network.

Excitel Router Admin portal IP Address

By typing the router’s IP address in the URL bar, you specify the destination for your web browser to establish a connection. This connection enables you to access the admin portal hosted by the router.

The IP Address is

Try if this does not work. Routers are typically assigned a default IP address that allows users to access their admin portals.

Step 4: Enter the Router’s Username and Admin Password

Once you have an established connection between your device and router, now you will be presented with a window with the following dialogue box.

You will need to enter the default password and username to get into the admin portal.

The admin password is a security measure implemented to prevent unauthorized access to the router’s settings.

Default Admin Password of Syrotech Admin Portal
  1. The username is “admin”. Make sure it’s all lowercase letters.
  2. Enter the password, which is Syro@43210$. Password is also case-sensitive.
  3. Enter the verification code, which is written in the brown box right above the login button.

You will be asked to change your password when you log in for the first time. Keep a simple new password that is easy to remember.

Default Login window syrotech router

Login again after you have changed your password.

If this password does not work, reset your Syrotech router by following the steps in the next heading, as someone else might have changed it.

By entering the correct admin password, you authenticate yourself as an authorized user with administrative privileges. This step ensures that only authorized individuals can make changes to the router’s configuration.

Find the reset button on your Syrotech router. It is usually a small, recessed button on the back or bottom of the device. The button may be labeled as “Reset” or represented by a small hole.

Step 2: Prepare for Reset

With the Syrotech router powered on, press and hold down the reset button with a paperclip or a similar pointed object. Hold it for about 10-15 seconds.

How to reset Syrotech Wifi Router.

Step 3: Power Cycle the Router

While holding down the reset button, unplug the power cable from the router. Keep the reset button pressed for 10-15 seconds while the router is unplugged.

Step 4: Access Default Settings

Once the Syrotech router has finished resetting, it will return to its default factory settings.

You can now access the router’s admin portal using the default login credentials provided by the manufacturer.

It’s important to note that performing a router reset will erase all customized settings, including Wi-Fi passwords, port forwarding configurations, and any other changes you made to the router’s settings.

These default credentials are typically printed on the router itself or included in the router’s documentation. For Syrotech, it is; Username: admin, and the password is Syro@43210$.

After the reset, you’ll need to reconfigure the router according to your preferences.

Additional Read: LOS Light Blinking Red on PLDT Router [Solved]

Since you may not be logging in for the first time to your Syrotech Router, and you may have to change your admin portal password, here it is how you can do it.

We know you already changed the password when you logged in for the first time, but to have that window pop up again, you will have to reset your router, which has its own challenges.

You can not change your username.

So, here is a simple process of how to change your admin password.

Change admin password of syrotech router
  1. Login to the admin portal with the current password and username.
  2. Now go to the Management tab from the horizontal menu on the top.
  3. Enter your existing and new passwords to change the admin portal password of your Syrotech Router.
  4. Log out and Login to confirm the change.

In case you forget your admin password, you can always reset your device by following the steps mentioned above.

Most of the time, the purpose of accessing the admin portal is to change the wifi name and password.

Here are easy steps to follow in case you want to change your Syrotech Wifi Name and Password.

Login to the admin portal with IP Address and your username/password.

Login to Syrotech Admin portal to change wifi password

Once you are in, click the NETWORK tab on the horizontal menu.

Then click on network

Then click on the WLAN tab in the secondary horizontal menu.

The click on WLAN

After that, click on WLAN Basic menu from the left panel and change SSID, which will be your new wifi name. Click apply changes to change the wifi name.

Now Change Wifi Name of Syrotech router by changing SSID which will be the new wifi name.

To change the wifi password, click on the WLAN Security on the left menu.

TO change password, goto WLAN Security and change pre-shared key.

Ensure the encryption type is WPA2 Mixed and the authentication mode is Personal.

Now change the preshared key, which is your new wifi password. Ensure to keep a password that is neither too hard to remember nor too easy to be guessed easily.

Changing the wifi name and password will disconnect all devices and will need to be reconnected.

Leave a Reply

Your email address will not be published. Required fields are marked *