Skip to content

GE Refrigerator LED Lights Flickering (Solved 2023)

GE Refrigerator LED Lights Flickering

Founded in 1907, General Electric, commonly known as GE, has established itself as a prominent manufacturer of household appliances.

Among their product line, their refrigerators have gained a reputation for excellence, showcasing a wide range of models and types, including top and bottom freezers, French doors, side-by-side, under-the-counter, and quad-door.

In particular, the GE French Door Refrigerator has proven to be a popular choice among consumers and is considered their best-selling style.

General Electric, or GE, has upgraded its refrigerators by replacing traditional fluorescent light bulbs with LED modules.

However, like any technology, the LED lights in your GE refrigerator may experience issues. A defective LED or plug, a faulty door or light switch, sudden fluctuations in electricity, or a short-circuited printed circuit board (PCB) can cause the LED lights in your GE refrigerator to flicker.

It is imperative to initiate a reboot of the electronic control board before attempting any fixes. Simply unplugging the fridge from the wall outlet and waiting for 5 minutes before reconnecting it may promptly resolve the flickering issue.

Now that we know what is causing GE Refrigerator LED Lights Flickering let’s try to fix the issues;

Fix 1: Securing loose LED Module Plugs

If you’re experiencing flickering LED lights in your refrigerator, it’s important to start troubleshooting with the simplest cause first.

In many cases, loose LED module plugs can cause the issue. It’s essential to check the connections of the LED module plugs before considering other possible causes.

One way to determine if the LED module plugs are loose is to observe if only one set of LEDs is flickering. If the LEDs in the other compartment are working fine, it’s a sign that the issue is localized to the loose LED module plugs.

To Fix this problem, unplug the refrigerator and then, using a simple push, remove the light cover.

Look for any loose plug, rust or moisture, a blackening, or a burnt smell. Secure the plug, dry moisture, or replace the module if the chipset is burnt.

Fix 2: Addressing voltage fluctuations

In the US, the standard frequency for alternating current is 60 Hz per second, which is optimized for household appliances. If your GE refrigerator’s lights are flickering, check the power supply, as it may be inadequate.

If your power cable is functioning correctly, it’s essential to investigate the status of your main electricity board. The board’s meter displays the electricity’s frequency, which can be measured using a frequency meter if the board lacks one.

Another factor that can cause monitor flickering is having multiple devices plugged into the same power outlet. Electric flux from other devices can distort the frequency of circuit boards and cause LED panels to strobe, which is a critical consideration when troubleshooting LED flickering.

Fix 3: Replacing a Defective Plug

If the LED module appears to be functioning properly, it is possible that the plug itself is the source of the issue. A defective plug will often exhibit signs of burning, such as discoloration on the pins or melted plastic.

One can employ a multimeter to determine if the plug is delivering power. If power is not being supplied, it will be necessary to replace the plug. Replacement plugs can typically be found at electric repair shops.

To replace the plug, one must cut the electrical wires near the defective plug and feed the wires into the new one. It may be necessary to solder the wires as well.

If one lacks the confidence or expertise to undertake these steps, it is recommended to seek the assistance of a certified electrician.

Fix 4: Fixing a Faulty door or light switch

If you’ve already checked the LED module and confirmed that the socket is receiving power, the issue may be related to a faulty door switch.

Give the switch a few flicks to see if that gets the light working again. If not, use a multimeter to check the switch for continuity.

If it turns out the switch is the culprit, you’ll need to replace it. But don’t worry. It’s a pretty straightforward fix!

Leave a Reply

Your email address will not be published. Required fields are marked *